top of page
background.png

Formulaire d'inscription à l'atelier de maintenance

The fee includes attendance for one person, all workshop materials, three lunches at National, and dinner the evening of the first day of the seminar.  Travel and living expenses are not included.

FORMAX Workshop Info:

​The FORMAX® Workshop focuses on practical training for mechanical and electrical maintenance personnel, providing tips and techniques on troubleshooting and servicing your FORMAX®, FORMAX® PLUS, FORMAX® 2000, PumaFX, and LeanFX  progressive headers to achieve top operating efficiency. Attendees will learn through combined classroom and hands-on instruction using special fixtures created specifically for training.  Each fixture is a key mechanism from the machine mounted in a way to give easy access and visibility for trainer and trainees.  This workshop is an ideal refresher on up-to-date FORMAX® maintenance techniques, and is an excellent program to get newer employees oriented to effective practices. Each participant receives a FORMAX maintenance and troubleshooting guide, plus material presented in the lectures.​​​

 

Areas covered in the workshop include:
 

Mechanical Systems:

  • Transfer Alignment and Adjustment

  • Kickout Setup and Adjustment

  • Linear Feed Adjustments

  • Heading Slide Seals

  • Clutch Brake

Electrical Systems:

  • Hardware Review

  • Wiring Diagrams

  • Troubleshooting

Pressure Systems:

  • Hydraulic

  • Lubrication

  • Pneumatic

In-Person Seminar Format:

  • Preregistration is required.

​​

MEETING LOCATION: All sessions are held in our plant at 161 Greenfield Street, Tiffin, Ohio. They will begin promptly at 8:00 AM on the dates indicated and end at approximately 4:00 PM the last day.

 

HOTEL GUEST ROOMS: Hotel accommodations can be made by calling one of the following hotels: 
 

  • Holiday Inn Express at 419-443-5100 

  • Hampton Inn of Tiffin at 419-443-5300 

Formulaire d'inscription au séminaire

Veuillez remplir le formulaire suivant pour vous inscrire aux séminaires présentés par National Machinery.

Introduction aux principes de Frappe à Froid

(En français)

(hébergé à Nuremberg)

Seminar Dates:

Paiement
Veuillez envoyer un chèque en USD, un mandat postal ou un bon de commande à l'ordre de National Machinery LLC à l'adresse ci-dessous :

Machinerie nationale LLC

À l'attention de : Tammy Dryfuse
161, rue Greenfield
Tiffin, Ohio 44883

CONFIRMATION:
Les frais doivent être reçus dans leur intégralité avec votre formulaire d'inscription pour être confirmés.  Chaque séminaire a un nombre de places limité et sera rempli selon le principe du premier arrivé, premier servi, la priorité étant donnée aux utilisateurs de l'équipement national._cc781905 -5cde-3194-bb3b-136bad5cf58d_ Il doit y avoir un minimum de 6 participants pour qu'un atelier ait lieu.  Les confirmations ne seront pas envoyées tant que ce minimum ne sera pas atteint._cc781905-5cde-3194-bb3b -136bad5cf58d_ S'il n'y a pas assez de participants, vous serez averti par e-mail.

ANNULATIONS :
Un remboursement complet sera émis pour les annulations effectuées jusqu'à deux semaines avant le début du séminaire. Les annulations reçues moins de deux semaines avant le séminaire sont assujetties à des frais administratifs de 150 $. Les participants confirmés qui n'annulent pas et ne se présentent pas sont redevables de la totalité des frais de séminaire. La confirmation de votre présence sera faite à la première adresse de contact ou au numéro de courriel, de télécopieur ou de téléphone indiqué sur votre formulaire d'inscription, et non à votre adresse postale. Un remplacement peut être effectué à tout moment et doit être soumis par écrit.

​

DANS LES FRAIS D'ATELIER : Les frais comprennent la participation d'une personne, tout le matériel de l'atelier, trois déjeuners au National et le dîner le soir du premier jour du séminaire. Les frais de déplacement et de séjour ne sont pas inclus.

 

DÉTAILS DE LA RÉUNION : Toutes les sessions ont lieu dans notre usine au 161 Greenfield Street, Tiffin, Ohio. Ils débuteront à 8h00 précises aux dates indiquées et se termineront vers 16h00 le dernier jour.

​

CHAMBRES D'HÔTEL :

L'hébergement à l'hôtel peut être effectué en appelant l'un des motels suivants : 

  • Holiday Inn Express au 419-443-5100 

  • Hampton Inn de Tiffin au 419-443-5300 

 Lorsque vous faites vos réservations, assurez-vous de mentionner que vous êtes un participant à l'atelier National Machinery. Un tarif spécial est disponible pour les participants.

​

DES QUESTIONS: Veuillez appeler Tammy Dryfuse tdryfuse@nationalmachinery.com at National Machinery LLC à Tiffin au 419-443-2630 ou Customer Support Services au 419-443-4800.

bottom of page